cisco.nxos.interface
Description
Cisco NX-OS Network interface resource
Fields
| ID | TYPE | DESCRIPTION |
|---|---|---|
| name | string | Interface name/identifier |
| description | string | Interface description |
| adminState | string | Administrative state (up/down) |
| linkStatus | string | Link status (up/down) |
| hardwareType | string | Hardware type (e.g., VLAN, Ethernet, Tunnel) |
| encapsulation | string | Encapsulation type (e.g., 802.1Q Virtual LAN) |
| macAddress | string | MAC address |
| bia | string | Burned-in address |
| ipAddress | string | IP address with subnet mask |
| mtu | string | Maximum transmission unit |
| bandwidth | string | Interface bandwidth |
| speed | string | Interface speed |
| duplex | string | Duplex setting (full/half) |
| vlanId | string | VLAN ID for VLAN interfaces |
| inputRate | string | Input bit rate |
| outputRate | string | Output bit rate |
| inputPackets | string | Total input packets |
| outputPackets | string | Total output packets |
| inputErrors | string | Input error count |
| outputErrors | string | Output error count |
| mode | string | Interface mode |
| runningConfig | cisco.nxos.runInterfaceConfig | The interface configuration, obtained by running show running-config interface |
| switchportConfig | cisco.nxos.switchportConfig | The interface switchport configuration, obtained by running show running-config interface switchport |