In the Linux kernel, the following vulnerability has been resolved: slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock During the SSR/PDR down notification the tx_lock is taken with the intent to provide synchronization with active DMA transfers. But during this period qcom_slim_ngd_down() is invoked, which ends up in slim_report_absent(), which takes the slim_controller lock. In multiple other codepaths these two locks are taken in the opposite order (i.e. slim_controller then tx_lock). The result is a lockdep splat, and a possible deadlock: rprocctl/449 is trying to acquire lock: ffff00009793e620 (&ctrl->lock){+.+.}-{4:4}, at: slim_report_absent (drivers/slimbus/core.c:322) slimbus but task is already holding lock: ffff00009793fb50 (&ctrl->tx_lock){+.+.}-{4:4}, at: qcom_slim_ngd_ssr_pdr_notify (drivers/slimbus/qcom-ngd-ctrl.c:1475) slim_qcom_ngd_ctrl which lock already depends on the new lock. Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ctrl->tx_lock); lock(&ctrl->lock); lock(&ctrl->tx_lock); lock(&ctrl->lock); The assumption is that the comment refers to the desire to not call qcom_slim_ngd_exit_dma() while we have an ongoing DMA TX transaction. But any such transaction is initiated and completed within a single qcom_slim_ngd_xfer_msg(). Prior to calling qcom_slim_ngd_exit_dma() the slim_controller is torn down, all child devices are notified that the slimbus is gone and the child devices are removed. Stop taking the tx_lock in qcom_slim_ngd_ssr_pdr_notify() to avoid the deadlock.
4.10.0-14.16~16.04.14.10.0-19.21~16.04.14.10.0-20.22~16.04.14.10.0-21.23~16.04.14.10.0-22.24~16.04.14.10.0-24.28~16.04.14.10.0-26.30~16.04.14.11.0-13.19~16.04.14.11.0-14.20~16.04.14.13.0-16.19~16.04.3+13 more5.0.0-1021.24~18.04.15.0.0-1022.25~18.04.15.0.0-1023.26~18.04.15.0.0-1024.27~18.04.15.0.0-1025.285.0.0-1027.305.3.0-1016.17~18.04.15.3.0-1017.18~18.04.15.3.0-1019.21~18.04.15.3.0-1023.25~18.04.15.3.0-1028.30~18.04.15.3.0-1030.32~18.04.15.3.0-1032.34~18.04.25.3.0-1033.355.3.0-1034.365.3.0-1035.374.15.0-1002.24.15.0-1003.34.15.0-1004.44.15.0-1008.84.15.0-1009.94.15.0-1012.124.15.0-1013.134.15.0-1014.144.15.0-1018.184.15.0-1019.19+34 more5.3.0-1007.8~18.04.15.3.0-1008.9~18.04.15.3.0-1009.10~18.04.15.3.0-1010.11~18.04.15.3.0-1012.13~18.04.15.3.0-1013.14~18.04.15.3.0-1016.17~18.04.15.3.0-1018.19~18.04.15.3.0-1019.20~18.04.15.3.0-1020.21~18.04.1+6 more4.18.0-1006.6~18.04.14.18.0-1007.7~18.04.14.18.0-1008.8~18.04.15.0.0-1012.12~18.04.24.15.0-1001.14.15.0-1003.34.15.0-1005.54.15.0-1006.64.15.0-1008.84.15.0-1009.94.15.0-1010.104.15.0-1014.144.15.0-1015.154.15.0-1017.18+28 more5.3.0-1008.9~18.04.15.3.0-1009.10~18.04.15.3.0-1010.11~18.04.15.3.0-1012.13~18.04.15.3.0-1014.15~18.04.15.3.0-1016.17~18.04.15.3.0-1017.18~18.04.15.3.0-1018.19~18.04.15.3.0-1020.22~18.04.15.3.0-1026.28~18.04.1+3 more4.15.0-1030.324.15.0-1032.344.15.0-1033.354.15.0-1034.364.15.0-1036.384.15.0-1037.394.15.0-1040.424.15.0-1041.434.15.0-1042.444.15.0-1044.46+23 more5.4.0-1025.25~18.04.15.4.0-1027.28~18.04.15.4.0-1029.31~18.04.15.4.0-1030.32~18.04.15.4.0-1032.34~18.04.15.4.0-1033.35~18.04.15.4.0-1035.37~18.04.15.4.0-1036.38~18.04.15.4.0-1037.39~18.04.15.4.0-1039.41~18.04.1+27 more